Kitchen Remodel: Durock Installation

At this stage, I am ever so excited for this segment. The journey to concrete countertops is a fast-coming reality!

Oh, my disclosure:

Christine’s Corner is a participant in the Amazon Services LLC Associates Program and VigLink, affiliate advertising programs designed to provide a means to earn fees by linking to Amazon.com and other affiliated sites. All products and materials in this post were purchased and all opinions are from Christine’s Corner with no compensation from my experience.

Durock Installation

With the kitchen cabinets are installed, it is time to install the Durock and edge forms!  As a result of Ikea’s frameless cabinets, I have to have 5/8″ substrate thickness when using Concrete Countertop Solutions cast in place forms.

To address this situation, I attached 1/8″ plywood strips around the cabinet edges. I used scrap plywood and attached with silicone.  I used silicone to attach 1/2″ thick Durock to the plywood strips. I opted for silicone because the concrete counter top is attached but can be removed if I ever change my mind.

I selected Durock as my substrate because it is easy to work with. Durock is easy to install and concrete bonds well for a solid foundation. To use Durock, measure the countertop, then mark the Durock.  Measure twice, then score with a utility knife on both sides. Apply pressure on the scored edge to snap. If the counter top requires more than one piece, simply butt the joints together. I opted to cement tape and grout the joint to insure no leak-through. You can see from the image below the jointed seams.

Durock installation with taped seams
Durock installation with jointed seams

As you can see, this is a working kitchen so the appliances are in place.  The only item that is missing is the sink. I miss my kitchen sink!

No major issues, for sure!

All Durock installed on base cabinets and looking good!
All the Durock installed. Looks great so far!

Lastly, due to life struggles in the last year, I wrote affirmations on the island slab of Durock. Not quite the same as my name in the cement, but lots of wishes that will be there for the test of time.  Pretty cool, I think.

Affirmations and wishes written on the Durock
Affirmations and wishes!

Until the next time,

~Always take the safest path, never take shortcuts.

Christine

Kitchen Remodel: Ikea Cabinet Assembly and Install

Christine’s Corner story on the assembly and install of Ikea kitchen cabinets participates in the Amazon Services LLC Associates Program and VigLink, affiliate advertising programs designed to provide a means to earn fees by linking to Amazon.com and other affiliated sites. All products and materials in this post were purchased and all opinions are from Christine’s Corner with no compensation from my experience (full disclosure).

Demo Work

I built the new cabinets after the demo work.  I had no space to build and store the new cabinets! To deal with the space issue, the old cabinets were removed then the Sektion suspension rails hung on the wall. The rails allow the cabinets to hang on the wall and weight is not on the legs. A critical consideration given the weight of concrete countertops.

Installation: Wall Cabinets

Installation begins by measuring, cutting,  and mounting the rail 32 3/16″ from the highest location in the kitchen. The rail must be level for level cabinets. Anchor the rail every twelve inches. Draw the cabinet layout on the wall to ensure right fit and layout!

The most effective tools in this segment was a drill and the FIXA 17-piece tool set.  The great thing about Ikea toolkits is that everything is “Ikea standard” so the drill bits and screwdriver bits are the right size. Pressing the easy button–and at $7.99, is a bargain!

The cabinet assembly is very simple and the details are fairly clear.  Please look through the directions to find the format of assembly that applies to your setup.  This is important because you may put the cabinet together in a way that does not apply!

Cabinet installation in limited space
Working in limited space

Starting in the corner, I assembled and hung each cabinet. Open box, assemble cabinet, hang on wall.  Wash, rinse, repeat. I hung all of the cabinets with no assistance except for the base-corner cabinet. My son helped me hang the corner cabinet.

Cabinet instructions are to install the feet on the cabinet boxes and have two people lift the cabinet in place to avoid breaking the plastic feet because the feet are only really used for the toe kicks. Hanging the cabinets first and then install and fit the feet to the floor is an alternative method. No broken legs and one person installation!

Installation:  Kitchen Island

The next step: install the island. Secure the cabinets to the floor for safety! Ikea has Sektion Support Brackets for kitchen islands. Unfortunately, I was short brackets.  As a result of the shortage,  I made a few using left over framing lumber and L-brackets.

Lastly, I installed the drawers–I wanted a sneek peek!

Finally finished–cabinets and drawers assembled and installed!

Cabinets and drawers installed!
Cabinets and drawers installed!

My DIY kitchen remodel considers life because it is a working kitchen. As a result, I placed the Formica top on the new cabinets in order to have a little space to cook.  Because the dishwasher still installed and working I can cook and clean. It’s inconvenient, but less expensive than take out!

Previous Post: Cabinet Demo

Next Post: Durock Install.

~Always take the safest path, never take shortcuts.

Christine

Kitchen Remodel: Cabinet Demolition

The Christine’s Corner is a participant in the Amazon Services LLC Associates Program and VigLink, affiliate advertising programs designed to provide a means to earn fees by linking to Amazon.com and other affiliated sites. All products and materials in this post were purchased and all opinions are from Christine’s Corner with no compensation from my experience.

Starting the Kitchen Cabinet Demolition: The First “Real” Step

The Many Boxes of Ikea were in the garage for about six weeks.

Any kitchen remodel is a very challenging project and I want to ensure I had the right mental and physical mindset to take on a project with this size and scope. My stair project took longer than anticipated–including one week of vacation from my “daytime” job. I considered various timing options.

The solution was losing my daytime job.

My higher power heard me, eh?

I was lost my job on Monday.  First of all,  I took the rest of the week off to grieve. Vacillating between calm and freaking out is not effective for any plan.

During that time, I saw an opportunity to start the kitchen remodel project. Time, bandwidth and supplies are now readily available. Seems like there is no time like the present!

Ready, Set, GO!

Why not start the demo?

My son kicked off the project. He began with the kitchen island demo. Teenagers (at least mine) are always happy to take things apart.  His only instructions:

  • Be safe;
  • Keep the cabinets intact for reuse for the later basement bar rebuild;
  • Be safe.

As a result of careful demolition, only one cabinet was lost.  The cabinet is not going to be reused in a future project. Great job, Alex!

Next, I removed the other cabinets. This part is scary; I would lose my kitchen.  As a result of my decision, would I become a nightmare renovation story?

Basic tools:

  • Pry bar
  • Hammer
  • Drill/Impact Drill
  • Jig Saw

I really appreciate my Dewalt 20V MAX tools–the brush-less drill and impact combo kit.  Cordless tools are convenient; having two batteries, one could be on the charger ready to go while the other was in use. Even with three tools (using the Dewalt 20V MAX Li-Ion Jig Saw) to cut down panels is handy. No cords for tripping hazards!

Finally, the old cabinets are gone!

The kitchen cabinets are out!
The Cabinets are Out!

I’m without cabinets and sink, however, my dishwasher and stove are working so I can at least cook.

Until the next time,

~Always take the safest path, never take shortcuts.

Christine